man in blue with helmet

Aerzen Turbo G5 plus!

02/09/2019

With the new generation Aerzen Turbo G5plus, AERZEN has designed the most compact and efficient turbo machine in its class. With the two new models AT75 and AT100, available immediately, the Aerzen Turbo G5plus portfolio has now been extended by another five to 13 sizes.

New models AT75 and AT100 are now available

The Aerzen Turbo G5plus is available in all flow rates from 300 m³/h to 8,400 m³/h, and with a maximum pressure of 1,000 bar. The current selection of blower sizes ranges from the small AT 25-0.8 G5plus to the largest model AT 200-1.0 G5plus. The series Aerzen Turbo G5plus lives up to its name, because it convinces through numerous advantages. The five new turbo machines have an extremely compact design and require very little space.

Further outstanding features are the innovative AERZEN air foil bearings with double coating and the new multilevel frequency converter technology, which reduces the heat loss in the motor to a minimum and, consequently, improves the total efficiency significantly.

Another advantage: an additional motor throttle or a sine filter, which has to be used with conventional frequency converters, is no longer necessary. The new air foil bearings represent a further decisive development thanks to double coating, consisting of Teflon and graphite. It impresses with increased temperature resistance and an increased service life of > 80,000 operating hours, regardless of start and stop cycles.

All advantages at a glance:

  • Increase of energy efficiency by up to 10% compared to conventional turbo technology.
  • Extended bearing life thanks to innovative AERZEN air foil bearings with double coating, maximum reliability even under extreme operating conditions.
  • 100% oil-free.
  • Lowest maintenance effort, only regular filter change.
  • Extended fields of application at ambient temperatures up to 50°C.
  • Active surge protection by means of automatic speed increase.
  • Space-saving design.


more releases

- Digital control technology for blowers and compressors

Everyone is talking about digitalisation, automation and Industry 4.0. Integrating digital applications in the control of blowers and compressors also offers great potential for increasing machine availability, reliability and information transparency in the higher-level control system of the...

read more
Conservation of resources through efficient solutions from AERZEN

- Conservation of resources through efficient solutions from AERZEN

According to the Federal Environment Agency, all sewage treatment plants in Germany have a combined annual electricity requirement of around 4,400 gigawatt hours This corresponds to the annual output of a modern coal-fired power plant. The ventilation of the aeration tank is a particular focus,...

read more
Food Safety: AERZEN has the ISO 22000

- Food Safety: AERZEN has the ISO 22000

AERZEN has the ISO 22000. The certificate is valid for all blowers, screw blowers and compressors built by the traditional company AERZEN at its headquarters in Lower Saxony. The management system for food safety unifies the standards landscape at international level. AERZEN is one of the first...

read more