Two people on stage

AERZEN Turbo Generation 5

Turbosopladores

For the maximum of energy efficiency in waste water treatment

Designed to handle unsolved energy problems.

This is the key unit for more energy efficiency, as single or combination design – and the power behind every municipal or industrial waste disposal facility: the AERZEN Turbo Generation 5. Unbeatable, AERZEN’s mix of blower, hybrid and Turbo technology.

Designed for large intake volume flows of between 1,200 m³/h and 16,200 m³/h. Variable frequency controlled, 100% oil-free, and tailor-made for the most demanding applications in waste water treatment. The powerful Turbo blowers from AERZEN will astound you with hitherto unknown savings. And delight you during normal operation with their minimal maintenance needs, easy handling, and robust nature. A typically AERZEN Turbo.

Las ventajas del Turbo Generation 5 de AERZEN de un vistazo:

  • Hasta un 30% de ahorro de energía en sistemas combinados
  • Hasta un 80% de eficiencia operativa
  • Costos de mantenimiento mínimos
  • Alto grado de fiabilidad y durabilidad
  • 100% sin aceite
Tipo de construcción
Turbosopladores
Diseño
Sobrepresión
Caudal volumétrico
706,32 a 9.535,32 CFM
Medio
aire
Transporte / Compresión
sin aceite
Operación de presión
14,5 mbar

There's a lot to be said about the economical Turbo. We'll keep it short.

AERZEN has been manufacturing Turbo blowers since 1911. In the decades since then, we have reached new heights in improving the technology of these units. And are setting new standards with the expertise we’ve achieved. These standards are reflected in the performance characteristics, the components, in all the details of our latest Turbo. Find out for yourself: the Turbo Generation 5.

100% Turbo

  • for mid and high airflows
  • from 1,200 m³/h to 16,200 m³/h
  • variable frequency control
  • 100% oil-free

Efficient peak values

  • up to 30% energy savings
  • up to 80% efficiency
  • minimal maintenance costs
  • control range from 40-100%
  • highly efficient individual components

Power motor

  • PMS – Permanent Magnet Synchronous Motor
  • no need for additional magnetization energy
  • extraordinary performance and response times
  • highly efficient during partial load operation
  • stainless steel impeller

Air foil bearings for extreme demands

  • contact-free and vibration-free operation
  • no components that would be subject to wear
  • absorbs even extreme pressure fluctuations
  • development from the aerospace industry
  • low energy idle mode
  • 100% maintenance-free

Further informationen are available within the product brochure

Calibración precisa del ciclo de carga: para una nueva dimensión de eficiencia en los tanques de aireación

El impacto resulta evidente cuando se sabe que el consumo de energía en las plantas de aguas residuales convencionales puede ser de hasta un 80%: cada punto porcentual es esencial, tanto en términos económicos como ambientales. En los tanques de aguas residuales los valores de rendimiento del Turbo Generation 5 de AERZEN se traducen en la máxima eficiencia. En cifras: hasta un 30% de ahorro de energía y hasta un 80% de eficiencia operativa. Esto es totalmente increíble y prácticamente revolucionario. En AERZEN simplemente pensamos que esta es la manera más responsable de gestionar los recursos en las <751>plantas de tratamiento de aguas residuales</751>.

Accesorios y soluciones