Two people on stage

AERZEN Turbo blower Generation 5plus

TURBO

More compact, more efficient, better

With the new generation Aerzen Turbo G5plus AERZEN has developed the most compact and efficient turbo in its class.

The now introduced series Aerzen Turbo G5plus lives up to its name, because it convinces through numerous advantages. The new turbos have an extremely compact design and require very little space. Further outstanding features are the innovative AERZEN air foil bearings with double coating and the new multilevel frequency converter technology (> 55 kW), which reduces the heat loss in the motor to a minimum and, consequently, improves the total efficiency significantly. A further advantage: an additional motor throttle or a sine filter, which have to be used on conventional frequency converters, is no longer necessary.

A further decisive development are the new air foil bearings with double coating consisting of Teflon and graphite. It convinces through an increased temperature resistance and lifetime of > 80,000 hours of operation independently from start and stop cycles.

Aerzen Turbo G5plus is offered for volume flows from 300 m³/h to 8,400 m³/h and for a maximum pressure of 1,000 mbar. Eight sizes from the small AT 25-0.8 G5plus to the largest model AT 200-1.0 G5plus are currently available, five more are in preparation.

The advantages at a glance

  • Increase in energy efficiency by up to 10 percent compared to conventional turbo technology
  • Extended bearing life thanks to innovative AERZEN air foil bearings with double coating, maximum reliability even under extreme operating conditions
  • 100 percent oil-free
  • Low maintenance effort, only regular filter change
  • Extended application possibilities at ambient temperatures up to 50 °C
  • Active pump protection through automatic speed increase
  • Space-saving design

The key features and benefits of this high-speed turbo blower include:

  • 360 to 8400 m³/h air and gas volume flow range
  • 100% oil-free
  • Speed-controlled
  • Plug-and-play design
  • Up to 10% more efficient than standard turbo technology
  • Extended bearing life due to high-tech AERZEN air bearings featuring double coating for maximum performance and energy efficiency
  • Minimal maintenance requirements

NEW: Two new turbo sizes

he two new turbo sizes, Aerzen Turbo AT 35 and AT 60, are designed for medium volume flows of 700 - 2,700 m3/h and package capacities of up to 20 kW resp. 50 kW. Thanks to a completely newly developed motor design, the maximum differential pressure has also been optimised up to 900 mbar.

The development team was able to turn the efficiency screw once again and achieve significant increases in performance. The energy improvement of up to 10% is based on an aerodynamic redesign of the turbo impeller and the spiral housing. Sophisticated CFD analyses were the cornerstone for achieving this new level of efficiency.

In addition, the AERZEN turbo packages of the G5plus series have been subjected to further acoustic optimisation. Not only has the machine noise been reduced to an exceptionally quiet level of 72 dB(A), but the discharge and piping noise has also been reduced by a significant 10 dB(A), so that in future there will be no need for silencers on the system side.

Tecnologia
TURBO
funzionamento
Pressione
Portata
360 - 8.400 m3/h
Mezzo aspirato
Aria , gas neutri
Convogliamento / compressione
oil-free
Operazione pressione
1.000 mbar pressione relativa

There's a lot to be said about the economical Turbo. We'll make it brief here.

AERZEN has built turbo blowers since 1911. Over the years, we’ve continued to perfect these assemblies from a technological standpoint. Along the way, we’ve developed expertise that sets standards worldwide today. It’s reflected in the performance characteristics, in every component, and in all the details of the newest Turbos. Discover the new Turbo Generation 5 and Generation 5plus.

100% Turbo

  • For small and large volume flows
  • From 300 m³/h to 16,200 m³/h
  • Speed-controled
  • 100% oil-free

Efficient peak values

  • Increase in energy efficiency by up to 10% compared to conventional turbo technology
  • Control range of 40% - 100%
  • Highly efficient individual components

Innovation driver: the permanent magnet motor

  • Extremely high-efficiency and energy-saving permanent magnet motor
  • Requires no additional energy to magnetize the rotor
  • Outstanding efficiency of an almost constant 96%, even in partial load operation

Innovative AERZEN air foil bearings

  • Forward-looking double coating made of Teflon and graphite
  • Theoretical bearing lifetime of >80,000 operating hours, regardless of stop and start cycles (>80 starts/stops per hour)
  • Resistant to pressure peaks (for example, SBR processes, pulsations caused by positive displacement machines) and compressor surge
  • Highly functional without necessary accessories (for example, electric control system, back up bearings, auxiliary electronics such as battery systems)
  • Highly reliable operation even during voltage fluctuations and power supply failures
  • 100% maintenance free

Further information are available within the product brochure

Prestazioni & dimensioni

AT 100-0.8 G5plus info tecniche

AERZEN Turbo blower Generation 5plus AT 100-0.8 G5plus
Tecnologia
TURBO
Serie
AERZEN Turbo blower Generation 5plus
funzionamento
Mezzo aspirato
Aria , gas neutri
Convogliamento / compressione
oil-free

Dati di prestazione

Differenza pressione, mbar
800
Portata*, m3/h
3.900
Potenza motore, kw
80
Pressione suono, max. db(A)
73

Rumorosit‡ con Cabina, senza silenziatore esterno.

* corrisponde al flusso del volume di consegna misurato convertito nelle condizioni di aspirazione specifiche del cliente p = 1,0 bar , t =20°C, rF = 0%

Dimensioni e peso

Larghezza (A), mm
900
Profondità (B), mm
1.150
Altezza (C), mm
1.600
Dimensione nominale
DN 200
Peso, kg
870

Dati non vincolanti, soggetti a modifiche!

Informazioni & documenti

  • AERZEN Turbo Generation 5 [T1-015-05]
    [Product brochure]

scarica

Accessori & soluzioni