Rotacinė stūmoklinė orpūtė

Patvarus nuolat naudojamas įrenginys.

AERZEN siūlo platų pūstuvų technikos spektrą. Galbūt net patį plačiausią. Rinkitės iš įvairiausios formos, dydžių ir ypatingos konstrukcijos naujoviškų mašinų. Skirta orui, deguoniui, neutralioms, agresyvioms ar toksiškoms dujoms tiekti vertikaliai arba horizontaliai, esant viršslėgiui, neigiamam slėgiui ar vakuumui. Visame pasaulyje ir beveik visuose pramonės sektoriuose naudojama ten, kur transportuojamas ir suspaudžiamas oras bei dujos. Galingas, ekonomiškas ir itin patvarus. Skirta tiems atvejams, kai prieinamumas, energijos vartojimo efektyvumas ir galimybė nenaudoti alyvos yra lemiami veiksniai.

Patikrintas ir inovatyvesnis nei kada nors anksčiau.

AERZEN sukonstravo pirmąją rotacinę stūmoklinę orpūtę Europoje. Tai įvyko 1868. Šiandien šios pakopos ir agregatai laikomi vienais iš geriausių kompresorių. Naujoviški serijos gaminiai skirti įvairiausiems naudojimo atvejams.

Roots principas tapo AERZEN rotacinių stūmoklinių orpūčių kūrimo pagrindu. Ir tai yra geras dalykas. Net po 150 metų tai mūsų sėkmingiausias įrenginių projektavimo principas. Šiandien AERZEN dviejų velenų rotacinės stūmoklinės orpūtės, veikiančios be alyvos, yra inovatyvios kaip niekada anksčiau. Daugybė konstruktyvių patobulinimų užtikrina ypač didelį efektyvumą. Tokie AERZEN patentai kaip integruotas pulsacijos mažinimo įtaisas užtikrina mažą triukšmo emisiją ir vibraciją. AERZEN orpūčių techninė priežiūra nesudėtinga, šios mašinos veikia pagal tvarumo principus, nes naudojimo laikotarpio sąnaudos nėra didelės. Būtų galima toliau tęsti inovatyvių sprendimų sąrašą. Bet kas svarbiausia kasdienei praktikai? Mūsų orpūčių ilgaamžė kokybė. Pasitikėkite ženklu „Made in AERZEN“.

„Delta Blower Generation 5“ pūstuvo agregatas

Konstrukcija
Rotacinė stūmoklinė orpūtė
Modelis
Viršslėgis , Mažas slėgis
Srauto tūris
30 iki 15.000 m3/h
Darbinis skystis
Oras , Neutralios dujos
Finansavimas
be alyvos

Rotacinių stūmoklinių orpūčių pakopa

Konstrukcija
Rotacinė stūmoklinė orpūtė
Srauto tūris
30 iki 65.000 m3/h
Darbinis skystis
Oras , Neutralios dujos , toxic , combustible , mixed , corrosive , explosive
Finansavimas
be alyvos

GR tipo proceso dujų orpūtės

Konstrukcija
Rotacinė stūmoklinė orpūtė
Srauto tūris
90 iki 38.000 m3/h
Darbinis skystis
Neutralios dujos , oxygen , corrosive , combustible , mixed
Finansavimas
be alyvos

GQ tipo proceso dujų orpūtės

Konstrukcija
Rotacinė stūmoklinė orpūtė
Srauto tūris
15.000 iki 100.000 m3/h
Darbinis skystis
toxic , inert gases , combustible , corrosive , mixed
Finansavimas
be alyvos

Aukšto slėgio orpūtės

Konstrukcija
Rotacinė stūmoklinė orpūtė
Srauto tūris
60 iki 6.000 m3/h
Darbinis skystis
Proceso dujos
Finansavimas
be alyvos

HV serijos viršslėgio orpūtės

Konstrukcija
Rotacinė stūmoklinė orpūtė
Srauto tūris
180 iki 97.000 m3/h
Darbinis skystis
Oras , Neutralios dujos , oxygen , toxic , combustible , explosive , corrosive , mixed
Finansavimas
be alyvos

Cisterninio vagono orpūtė

Konstrukcija
Rotacinė stūmoklinė orpūtė
Srauto tūris
600 iki 2.250 m3/h
Darbinis skystis
Oras , Neutralios dujos
Finansavimas
be alyvos

Neigiamo slėgio pūstuvai su išankstinio įleidimo funkcija

Konstrukcija
Rotacinė stūmoklinė orpūtė
Srauto tūris
60 iki 45.000 m3/h
Darbinis skystis
Oras , Neutralios dujos , oxygen , toxic , combustible , explosive , corrosive , mixed
Finansavimas
be alyvos

„Delta Blower“ biodujų agregatai GM 3S ... 50L

Konstrukcija
Rotacinė stūmoklinė orpūtė
Srauto tūris
30 iki 2.700 m3/h
Darbinis skystis
Atliekų ir biodujos , natural , town
Finansavimas
be alyvos

Atskyrimo vamzdžio orpūtė

Konstrukcija
Rotacinė stūmoklinė orpūtė
Srauto tūris
406 iki 15.570 m3/h
Darbinis skystis
Oras , Neutralios dujos , toxic
Finansavimas
be alyvos

VAKUUMAS ir išankstinis įleidžiamo srauto vėsinimas

Konstrukcija
Rotacinė stūmoklinė orpūtė
Srauto tūris
250 iki 61.000 m3/h
Darbinis skystis
Oras , Neutralios dujos , combustible , toxic , explosive , corrosive , mixed , oxygen
Finansavimas
be alyvos

AERZEN „Alpha Blower“ didelių matmenų orpūtės

Konstrukcija
Rotacinė stūmoklinė orpūtė
Srauto tūris
9.600 iki 77.000 m3/h
Darbinis skystis
Oras , Neutralios dujos
Tiekimas / tankinimas
be alyvos

GMd tipo mažaslėgės orpūtės

Konstrukcija
Rotacinė stūmoklinė orpūtė
Srauto tūris
60 iki 14.000 m3/h
Darbinis skystis
inert , toxic , combustible , mixed
Finansavimas
be alyvos

Positive displacement blower by AERZEN

top-class technology by the market leader

AERZEN is one of the most well-established and innovative manufacturers of technologies for the compression of air and gases. It was 150 years ago back in 1868 that the company produced the first positive displacement blower in Europe. Known as the Roots type blower, it was the forerunner for the further development of compressors on the continent. Since then, the company has consistently refined its compressor and vacuum technology and continuously optimised the efficiency of its products. Today the family-run company is a world market leader in the field of compressed air and vacuum production. AERZEN It is a provider of highly-efficient series products as well as individual customer-specific solutions for air and gas compression and vacuum applications.

In addition to screw compressors, rotary lobe compressors and turbo blowers, positive displacement blowers are among the most important product groups. The product range in the area of positive displacement blowers is also wide-ranging. AERZEN The company supplies blowers for air and inert gases but also process gas blowers, high-pressure blowers, vacuum blowers, vacuum pumps and biogas blowers

Positive displacement blowers are ideal as standalone solutions or as a group of machines for continuous operation – they are the robust endurance runners in the field of air and gas conveyance. 

Applications

The company’s compressors and blowers have their uses in a wide range of industries. The main field of application for blowers and compressors is in the treatment of water and wastewater. The compressors and blowers are used for aerating aeration tanks in wastewater treatment plants, either individually or as a group of machines. By nature, this process is very energy-efficient and therefore also cost-efficient. As an application specialist, AERZEN has developed very efficient and resource-saving solutions for this area with the aid of intelligent control systems, a combination of various air compressor technologies and opportunities for heat recovery.

Blowers are also used in pneumatic conveying, chemical and process engineering, pressure and vacuum technology, and the process gas and refrigeration industry. Because of the range of sizes, types of construction and special equipment, positive displacement blowers can be implemented extremely flexibly. The machines can be fitted either vertically or horizontally. There is also a lot of flexibility when it comes to the conveyed media: the range of applications stretches from air and oxygen to inert, corrosive or toxic gases.

ROOTS technology

Blower engineering is based on the Roots principle. The term “Roots” blower dates back to the American inventors Philander and Francis Roots, who had the Roots blower patented in 1860. Roots technology involves three-lobe rotary pistons circling in a cylindrical housing, thus transporting the gaseous medium from the suction side to the discharge side. The compression of the medium is created by backflow of the accelerated gases on the discharge side. This generates a differential pressure of up to 1000 mbar.

“Blower power made by AERZEN”

The company’ positive displacement blowers are efficient, long-lasting, robust and are used around the world. There is a reason behind the proverbial reliability of the machines: AERZEN manufactures all key components in house, from the assembly through to the control system and, in so doing, the family-run company places value on quality and sustainability. Only high quality materials are used for the production. Development, production, sales, assembly and maintenance of the company's products as well as the quality management system have gained multiple certifications.

The most innovative products in blower technology include the Delta Bower Generation 5

The name Generation 5 refers to the many technical innovations which this product embodies. One of these is the large volume range. The advanced blower for the handling of air and inert gases generates a volume of 30 to 15,000 m3/h. The positive displacement blower is available in all standard sizes, can be modified to customer specifications, therefore allowing flexible implementation. Furthermore, the series features high efficiency, low maintenance costs, reduced life cycle costs, compactness and simple handling.

100% pure process air

Another selling point is the generation of TÜV-certified oil-free process gas. This specifically plays a major role in industry sectors such as food processing, in which the blowers are used e.g. for pneumatic conveying or aeration of bulk goods such as flour or other powdery foods.

Silencers free from absorbing material

In this sector, there is another important feature of the Generation 5 Delta Blower type machines: they provide innovative sound protection with reactive silencers. Conventional silencers are equipped with sound proofing which over time become tired and worn by the sound wave energy. This wear puts the process air at risk of soiling by the absorbing material. The innovative reactive silencer by AERZEN is free of absorbents and only silences the sound by diverting the air – this feature makes this type of machine particularly suitable for use in the food and chemical industry. The patented sound protection technology also has other advantages: the purity of the medium prevents soiling in the machine. Pressure losses which arise in all compressed air applications remain constant throughout its lifetime. It avoids an increase in pressure losses through deposits in the machine, and reduces cleaning and maintenance costs.

The base supports for the blowers are also certified as spark arresters for ATEX applications. 

Made quieter with integrated pulsation reduction

An innovation specially developed for the Delta Blower is represented by the patented process of pulsation reduction, which is integrated into the step itself. Two channels cast into the cylinder allow the reversing the medium into the conveying chamber to be controlled in such a way as to avoid return and squeezing pulses. This already minimises sound in the blower step and increases the lifetime of the bearings. This technology is integrated into all sizes of the Delta Blower.

Intelligent design – easy handling

The latest generation of positive displacement blowers also score with their overall design: they feature a compact construction form and only require one small assembly space. This allows machine rooms to be built with smaller dimensions. The compact design allows transportation with a fork lift truck or elevating platform. Flexible machine mounts isolate the impact sound, thus contributing to quieter operation. The design also enables user-friendly access to the front. For example, the oil level can be read from the outside while the machine is running, and the wearing parts such as the oil filter can be checked simply and quickly.

The extremely robust design makes it possible to use the blower for continuous operation even under difficult environmental conditions. Delta Blower type positive displacement blowers are suitable for use in all climates – with corresponding modifications, even in earthquake zones – or for installation on ships or for other mobile applications.

Modifications and service

AERZEN produces high quality standard products, but also offers a wide range of customer-specific modifications. Depending on the customer's wishes, the application of special motors, special coatings or ATEX versions are possible. If the assembly requires installation in the desert, it can be specially equipped with a sand collector. Special robust acoustic hoods are available for increased wind loads in earthquake or hurricane-prone regions. If required, components can be built in special construction materials for the application of special gases. Customer-specific extended documentation is also possible.

The company is a global player and offers excellent service: With more than 45 subsidiaries, country agents and more than 2,000 employees, it is present around the globe. The service which the company provides for its customers all over the globe is also present and close by. The close-nit sales and company network guarantees reliable availability of AERZEN machines and service provision – local support is possible throughout the life cycle of a plant. The company offers its customers an extensive range of services that goes beyond replacement parts and repairs. In addition to professional commissioning of new plants, AERZEN also offers on-site training sessions, machine monitoring and machine inspections. Also available are individual service and maintenance contracts, attractive plug & play solutions, which are supplied as fully configured, parametrised and installation-ready machines together with an integrated service package.