-   Article New Multicore Turbo Series

The newly developed turbo blowers from AERZEN represent an efficient and space-saving alternative to conventional geared turbos or multistage central compressors for wastewater treatment plants with high oxygen demand.

Two separate turbo stages in one assembly

The regulation of the oxygen content as required is the key to an optimal biological process, which is necessary for the decomposition of organic material in the aeration tank.

The AERZEN Multicore turbo blowers are based on air foil bearing technology and are equipped with two separate turbo stages in one assembly. So far, the most powerful speed-controlled turbo blowers have currently had a connected load of approx. 400 kW. Now, even larger wastewater treatment plants will be able to replace their outdated assemblies with modern air foil bearing technology. 

Like the proven G5 and G5plus series, the single stage turbo blowers of the Multicore series are characterised by very low energy consumption and cover a wide volume range on the turbo blower market.

The new sizes AT600 and AT800 enable maximum volume flows of 29,000 m³/h and outputs of up to 600 kW, and all this with an extremely wide control range of 15 to 100 percent of the nominal volume flow.