Two people on stage

AERZEN Turbo blower Generation 5plus

Turbos

3D representation of the product

Aerzen Turbo Blower Generation 5plus is another excellent choice for high-speed turbo blower. This turbo blower is ideal for volume flows between 360 and 8400 m³/h. It has a significantly smaller physical footprint but boasts up to 10% higher operational efficiency than conventional turbo blowers.

This space-saving high-speed turbo blower is 100% oil-free. It has numerous applications in water and wastewater treatment, pneumatic transport of bulk materials, and chemical and process technologies.

The key features and benefits of this high-speed turbo blower include:

  • 360 to 8400 m³/h air and gas volume flow range
  • 100% oil-free
  • Speed-controlled
  • Plug-and-play design
  • Up to 10% more efficient than standard turbo technology
  • Extended bearing life due to high-tech AERZEN air bearings featuring double coating for maximum performance and energy efficiency
  • Minimal maintenance requirements

NEW: Two new turbo sizes

he two new turbo sizes, Aerzen Turbo AT 35 and AT 60, are designed for medium volume flows of 700 - 2,700 m3/h and package capacities of up to 20 kW resp. 50 kW. Thanks to a completely newly developed motor design, the maximum differential pressure has also been optimised up to 900 mbar.

The development team was able to turn the efficiency screw once again and achieve significant increases in performance. The energy improvement of up to 10% is based on an aerodynamic redesign of the turbo impeller and the spiral housing. Sophisticated CFD analyses were the cornerstone for achieving this new level of efficiency.

In addition, the AERZEN turbo packages of the G5plus series have been subjected to further acoustic optimisation. Not only has the machine noise been reduced to an exceptionally quiet level of 72 dB(A), but the discharge and piping noise has also been reduced by a significant 10 dB(A), so that in future there will be no need for silencers on the system side.

Tipo de construção
Turbos
Design
Sobrepressão
Vazão
360 a 8.400 m3/h
Fluido
ar , gases neutros
Transporte/Compressão
isento de óleo
Operação de pressão
1.000 em mbar

There's a lot to be said about the economical Turbo. We'll make it brief here.

AERZEN has built turbo blowers since 1911. Over the years, we’ve continued to perfect these assemblies from a technological standpoint. Along the way, we’ve developed expertise that sets standards worldwide today. It’s reflected in the performance characteristics, in every component, and in all the details of the newest Turbos. Discover the new Turbo Generation 5 and Generation 5plus.

100% Turbo

  • For small and large volume flows
  • From 300 m³/h to 16,200 m³/h
  • Speed-controled
  • 100% oil-free

Efficient peak values

  • Increase in energy efficiency by up to 10% compared to conventional turbo technology
  • Control range of 40% - 100%
  • Highly efficient individual components

Innovation driver: the permanent magnet motor

  • Extremely high-efficiency and energy-saving permanent magnet motor
  • Requires no additional energy to magnetize the rotor
  • Outstanding efficiency of an almost constant 96%, even in partial load operation

Innovative AERZEN air foil bearings

  • Forward-looking double coating made of Teflon and graphite
  • Theoretical bearing lifetime of >80,000 operating hours, regardless of stop and start cycles (>80 starts/stops per hour)
  • Resistant to pressure peaks (for example, SBR processes, pulsations caused by positive displacement machines) and compressor surge
  • Highly functional without necessary accessories (for example, electric control system, back up bearings, auxiliary electronics such as battery systems)
  • Highly reliable operation even during voltage fluctuations and power supply failures
  • 100% maintenance free

Further information are available within the product brochure (please select a performance to see the product brochure)

Desempenhos e dimensões

AT 100-1.0 G5plus informações técnicas

AERZEN Turbo blower Generation 5plus AT 100-1.0 G5plus
Tipo de construção
Turbos
Séries
AERZEN Turbo blower Generation 5plus
Design
Fluido
ar , gases neutros
Transporte/Compressão
isento de óleo

Dados de funcionamento

Diferença de pressão, mbar
1.000
Vazão*, m3/h
3.000
Potência do motor, kw
80
Pressão sonora, max. db(A)
73

Nível de pressão sonora sem filtro de ruído, com cabine acústica.

* corresponde ao fluxo de volume de entrega medido convertido para as condições de entrada específicas do cliente p = 1,0 bar , t =20°C, rF = 0%

Dimensões e pesos

Largura (A), mm
900
Profundidade (B), mm
1.150
Altura (C), mm
1.600
Tamanho nominal
DN 200
Peso, kg
870

Dados de funcionamento não vinculativos! Sujeito a alterações técnicas!
Peso aproximado em kg sem motor e acionamento por correia.
Dimensões epesos incluindo cabine acústica.

Informação e documentos

  • AERZEN Turbo Generation 5 [T1-015-05]
    [Product brochure]

download

Acessórios e soluções