Two people on stage

AERZEN Turbo blower Generation 5plus

Turbo Blowerler

Daha kompakt, daha verimli, daha iyi

Yeni nesil Aerzen Turbo G5plus ile AERZEN, sınıfının en kompakt ve verimli turbo blowerini geliştirdi.

Piyasaya yeni sunulan Aerzen Turbo G5plus ismini hakediyor çünkü birçok ek avantaja sahip. Yeni turbolar son derece kompakt bir yapıya sahip ve kurulum için çok küçük bir alan gerektiriyor. Bunun yanında, çift kaplamalı yenilikçi AERZEN hava yataklı rulmanlar ve yeni çok seviyeli frekans invertörü (> 55 kW), motordaki ısı kaybını minimuma indiriken toplam verimliliği de kayda değer şekilde arttırıyor. Bir avantaj daha: konvansiyonel frekans invertörlerinde kullanılan sinüs filtresi ise artık gerekli değil.

Dikkat çekici bir diğer gelişme de, Teflon ve grafitten oluşan çift kaplamalı yeni hava yataklı rulmanlardır. Yüksek sıcaklık dayanımına sahip olan bu rulmanlar, dur/kalk döngüsünden bağımsız olarak > 80,000 saat çalışma süresine sahiptir.

Aerzen Turbo G5plus 300 m³/h ile 8,400 m³/h arası debi ve maksimum 1,000 mbar çalışma basıncında kullanılabilmektedir. En küçük model olan AT 25-0.8 G5plus ile en büyük model olan AT 200-1.0 G5plus arasında toplamda sekiz model bulunmaktadır. Beş model de halihazırda hazırlık aşamasındadır.

Bir bakışta avantajlar

  • Konvansiyonel turbo teknolojisine oranla %10 daha fazla enerji verimliliği
  • AERZEN çift kaplamalı ve hava yataklı rulman teknolojisi sayesinde uzun rulman ömrü ve zorlu çalışma koşullarında bile azami güvenilirlik
  • %100 yağsız
  • Düşük bakım maliyeti, sadece belirli zamanlarda filtre değişimi
  • 50 °C'ye varan ortam sıcaklıklarında bile geniş uygulama seçenekleri
  • Otomatik hız arttırımı sayesinde aktif pompa koruması
  • Yerden tasarruf sağlayan tasarım

The key features and benefits of this high-speed turbo blower include:

  • 360 to 8400 m³/h air and gas volume flow range
  • 100% oil-free
  • Speed-controlled
  • Plug-and-play design
  • Up to 10% more efficient than standard turbo technology
  • Extended bearing life due to high-tech AERZEN air bearings featuring double coating for maximum performance and energy efficiency
  • Minimal maintenance requirements

NEW: Two new turbo sizes

he two new turbo sizes, Aerzen Turbo AT 35 and AT 60, are designed for medium volume flows of 700 - 2,700 m3/h and package capacities of up to 20 kW resp. 50 kW. Thanks to a completely newly developed motor design, the maximum differential pressure has also been optimised up to 900 mbar.

The development team was able to turn the efficiency screw once again and achieve significant increases in performance. The energy improvement of up to 10% is based on an aerodynamic redesign of the turbo impeller and the spiral housing. Sophisticated CFD analyses were the cornerstone for achieving this new level of efficiency.

In addition, the AERZEN turbo packages of the G5plus series have been subjected to further acoustic optimisation. Not only has the machine noise been reduced to an exceptionally quiet level of 72 dB(A), but the discharge and piping noise has also been reduced by a significant 10 dB(A), so that in future there will be no need for silencers on the system side.

Model
Turbo Blowerler
Tasarım
Aşırı basınç
Debi
360 - 8.400 m3/h arası
Ortam
hava , nötr gazlar
Taşıma / Sıkıştırma
yağsız
Basınç işlemi
1.000 mbar gösterge basıncı

There's a lot to be said about the economical Turbo. We'll make it brief here.

AERZEN has built turbo blowers since 1911. Over the years, we’ve continued to perfect these assemblies from a technological standpoint. Along the way, we’ve developed expertise that sets standards worldwide today. It’s reflected in the performance characteristics, in every component, and in all the details of the newest Turbos. Discover the new Turbo Generation 5 and Generation 5plus.

100% Turbo

  • For small and large volume flows
  • From 300 m³/h to 16,200 m³/h
  • Speed-controled
  • 100% oil-free

Efficient peak values

  • Increase in energy efficiency by up to 10% compared to conventional turbo technology
  • Control range of 40% - 100%
  • Highly efficient individual components

Innovation driver: the permanent magnet motor

  • Extremely high-efficiency and energy-saving permanent magnet motor
  • Requires no additional energy to magnetize the rotor
  • Outstanding efficiency of an almost constant 96%, even in partial load operation

Innovative AERZEN air foil bearings

  • Forward-looking double coating made of Teflon and graphite
  • Theoretical bearing lifetime of >80,000 operating hours, regardless of stop and start cycles (>80 starts/stops per hour)
  • Resistant to pressure peaks (for example, SBR processes, pulsations caused by positive displacement machines) and compressor surge
  • Highly functional without necessary accessories (for example, electric control system, back up bearings, auxiliary electronics such as battery systems)
  • Highly reliable operation even during voltage fluctuations and power supply failures
  • 100% maintenance free

Further information are available within the product brochure

Performans & boyutlar

AT 150-0.8 G5plus teknik bilgi

AERZEN Turbo blower Generation 5plus AT 150-0.8 G5plus
Model
Turbo Blowerler
Seri
AERZEN Turbo blower Generation 5plus
Tasarım
Ortam
hava , nötr gazlar
Taşıma / Sıkıştırma
yağsız

Performans verisi

Fark basıncı, mbar arası
800
Debi*, m3/h arası
5.400
Motor gücü, kw arası
120
Ses basıncı, max. db(A)
73

Boşaltma gürültüsüz akustik muhafazalı ses basıncı seviyesi.

* müşteriye özel alım koşullarına dönüştürülen ölçülen teslimat hacmi akışına karşılık gelir p = 1,0 bar , t =20°C, rF = 0%

Boyut ve ağırlıklar

Genişlik (A), mm arası
1.000
Derinlik (B), mm arası
1.300
Yükseklik (C), mm arası
1.900
Nominal boyut
DN 250
Ağırlık, kg arası
870

Performans verileri bağlayıcı değildir! Teknik modifikasyonlar yapılabilir!

Bilgi & dokümanlar

  • AERZEN Turbo Generation 5 [T1-015-05]
    [Product brochure]

indir

Aksesuarlar & çözümler