Positive Displacement Blowers
Low Pressure Gas Booster
Series GMD
The GMD series, made by AERZEN, is the universal gastight booster solution for the low pressure range. Equipped with a magnetic coupling, it ensures a maintenance-free sealing concept. Locking systems for sealing the drive shaft are completely eliminated and allow a low-maintenance machine concept. The separation between oil and process side is achieved by a special piston ring seal.
Objemový průtok:
30
do
11,000
m3/h
Diferenciální tlak (Δp):
150
do
1,000
mbar
Střední:
Process Gases
Dopravníky:
bezolejový
Process gas blowers from AERZEN work reliably in all industries and in all markets and countries of the world.
AERZEN offers the process gas and refrigeration industry an enormously wide range of blower technologies - perhaps the widest ever. The machines work in a stand-alone manner, in a machine or container combination, onshore and offshore. You find them in really all key industrial applications.
Industrial gases
- Air separation
Oil & gas extraction and storage
- Gas recovery (VRU)
- Decarbonisation/tertiary oil recovery
Chemical industry
- Acetylene circular gas
Petrichemistry, refineries
- Ethylene, propylene, olefin (feed gas compression)
- Butadiene (extractive distillation)
Industrial research & development
- Circular processes (inert gases, purge gases)
Glass industry
- Oxygen injection (melting furnace)
- Tin bath protective atmospheres (hydrogen, nitrogen)
Americké jednotky
No- Druh stavby
- Positive Displacement Blowers
- Diferenciální tlak (Δp)
- 150 do 1,000 mbar
- Objemový průtok
- 30 do 11,000 m3/h
- Střední
- Process Gases
- Dopravníky
- bezolejový
Gas boosters for low pressure applications
The GMD series from AERZEN is the universal gastight booster solution for the low-pressure range. Equipped with a magnetic coupling, it guarantees a virtually maintenance-free sealing concept. Locking systems for sealing the drive shaft are completely eliminated and allow a low-maintenance machine concept. The separation between oil and process side is achieved by a special piston ring seal. The robust two-lobe design allows a design pressure of 7.0 barg according to AD2000/DIN EN 13445. 16 sizes guarantee optimum efficiency and operation conditions for every design case.
Design:
Nodular iron or stainless steel housing with round flanges and O-ring seals.
Sealings:
Shaft sealing by hermetically sealed magnetic coupling. Alternatively oil-purged double-acting mechanical seal with thermosiphon cooling for torques ≥ 600 Nm.
Direction of flow:
Vertically downwards.
Drive:
Direct coupling with motor (type of construction B35 for magnetic coupling or B3 for alternative shaft sealing via mechanical seal).
Design:
- Max. pressure increases of 1.0 bar
- Splash lubrication
- Separation of the oil chambers and the conveying chamber by grey cast iron or PEEK piston seals
- Separation of conveying and oil chamber possible through separating gas
- Sealing of drive shaft by hermetically sealed magnetic coupling, optionally by oil-lubricated double-acting mechanical seal
- Maximum pressure 7.0 bar (g)
- Housing sealed with O-ring seals
