man in blue with helmet

Superlative hydrogen compression: higher differential pressure with only one stage

New oil-free screw compressor from AERZEN for efficient compression of electrolysis hydrogen

24/08/2022

With the VRW536M, AERZEN is further expanding its portfolio of screw compressors for hydrogen compression. The design and water injection of the innovative compressor stage allow the highest differential pressure to date in a single-stage oil-free screw compressor in the competitive environment. The result: minimal footprint and significantly reduced investment and operating costs.

Bringing large H2 volume flows to intermediate and final pressures with fewer compressor stages without having to set up largest reciprocating compressor systems - this is exactly where the new oil-free VRW536M screw compressor from AERZEN comes in. Compression is based on the principle of oil-flooded screw compressors - with a small but subtle difference: the oil was replaced by water. The water serves both to cool the gas and to seal the internal gaps, enabling compression to higher differential pressures with highest efficiency. This stage can, thus, replace a two-stage system with classic dry screw compressors and is even more energy-efficient. For the customer, this results in significant advantages in terms of installation space as well as investment and operating costs.

Thoughtful down to the smallest detail

The VRW536M is designed for an operating pressure of up to 10.0 bar (abs.) and a volume flow of up to 6,000 Nm3/h at 50 Hz. The volume flow is controlled by means of a frequency inverter (speed control), the maximum speed change is 1 Hz/s. Pre-drying of the humid H2 gas is not necessary. Double-acting, water-purged mechanical seals on the conveying chamber ensure 100% oil-free operation. The use of stainless steel on cylinders and rotors guarantees longevity and flexible shutdowns under pressure with humid gas. The synchronisation of the rotors is realised via a pair of gear wheels to avoid contact of the rotors. In this way, the conveying chambers remain unlubricated and there is no oil contamination of the conveying medium. The VRW536M is available both with and without gearbox (directly driven).

Wide range of applications

The new package was specially developed for the efficient and safe compression of hydrogen, but is also ideally suited for other critical applications, such as flare gas or contaminated gases. In principle, the VRW536M can be ideally used as a pre-compressor (booster) for subsequent compressor technologies. The scope of delivery includes the customer-specific package with auxiliaries, the drive train, the instrumentation (optionally with machine monitoring), and on request also the complete control system and the acoustic hood.


more releases

- Blower and compressor technology installed in slim ISO container

Blower technology in containers has the potential to make process air supply noticeably leaner, more flexible and easier. AERZEN has already gained many years of experience in this field from its own rental business and is now using this know-how for a new solution. The idea: compressed air from the...

čtěte dále

- The new AERsmart: also for varying pressure.

AERsmart: the name stands for a composite control system that has set out to effectively improve the energy efficiency of oxygen supply in aeration tanks, especially in wastewater technology. AERZEN has now further developed the solution. The control system for the composite operation of different...

čtěte dále

- AERZEN expands its general turbo program. Highest energy efficiency with smallest footprint.

The Aerzen Turbo G5plus series is one of the most compact and efficient turbos in its class. The new AT 60 size brings with it numerous innovations. In addition to increased system pressure, the new turbo also scores with an extended control range and an efficiency increase of up to 10%.

čtěte dále