Compressed-air technology

AERZEN SYSTEMS offers selection and combination of the compressors, the drying process, the necessary filters, the pipings and the superordinated control

You are looking for a compressed-air station which is specially optimized for your case of application?  In addition to customised product solutions, AERZEN supports you within the entire development cycle, from the conception to the implementation and commissioning of your compressed air station.
The quality of the used materials is decisive. Therefore for the compressed-air production the proven AERZEN screw compressors are used.

Furthermore AERZEN offers selection and combination of the compressors, the drying process, the necessary filters, the pipings and the superordinated control. After handing over to current operation AERZEN’S after-sales service is available for you. Consequently your compressed-air station is always well-supplied.

Application reports

RWE Power AG use six AERZEN screw compressors for external compressed-air emergency supply

External compressed air emergency supply for a briquette factory

Success Story- RWE Power AG

Due to repairs, the Wachtberg briquette factory in Frechen had to temporarily shut down its compressed air station and the corresponding electrical switchgear. But a compressed air supply should not be interrupted - particularly when you have a total delivery volume of 282 m3/min. The solution: an external rental station from AERZEN International Rental B.V.