You are looking for a compressed-air station which is specially optimized for your case of application? In addition to customised product solutions, AERZEN supports you within the entire development cycle, from the conception to the implementation and commissioning of your compressed air station. The quality of the used materials is decisive. Therefore for the compressed-air production the proven AERZEN screw compressors are used. Furthermore AERZEN offers selection and combination of the compressors, the drying process, the necessary filters, the pipings and the superordinated control. After handing over to current operation AERZEN’S after-sales service is available for you. Consequently your compressed-air station is always well-supplied.
Due to repairs, the Wachtberg briquette factory in Frechen had to temporarily shut down its compressed air station and the corresponding electrical switchgear. But a compressed air supply should not be interrupted - particularly when you have a total delivery volume of 282 m3/min. The solution: an external rental station from AERZEN International Rental B.V.
Two oil-free Delta Twin DTS 35 WG screw compressors are used in ArcelorMittal’s largest beam rolling mill. They ensure a safe production in spite of pressure drops in the distribution system, together with a turbo compressor, superordinated control unit and absorption drier.
At glass factory Noelle + von Campe since March 2009 eight AERZEN Screw compressors produce oil free compressed air in various pressure ranges. The annual savings of energy- and maintenance costs are 350.000 Euros!
In modern mills compressed air is essential. Filter cleaning, product loosening, operation of valves and scales and fully automatic filling of silo trucks – everything is operated electro pneumatically. An ideal field of application for AERZEN units.